6T Pump Hoist Options

Breakout Wrench Cylinder

Breakout Wrench Cylinder

The optional breakout wrench hydraulic cylinder pins to the rear frame of the rig and is designed to attach to conventional chain tongs.

Bumper

Bumper

The heavy duty bumper (1/8" floor plate) is designed for extreme strength and long life.  The bumper can also be built with a receiver hitch.

Cathead (3T - 12T)

Cathead (3T - 12T)

The cathead is a hydraulically driven 6" diameter capstan and it mounted on the right rear corner of the unit.  Pulling capacity is 3200 lbs.

Deck

Deck

Hunke decks are made with 3/16" floor plate and supported by 3" channels underneath.

E-3 Mast Extension

E-3 Mast Extension

The E-3 extension is designed for light work or windmills. With the E-3 option the mast can be telescoped an additional 10 ft. and layback distance is improved by about 4 1/2 ft. When the E-3 is extended load limits are approximately 800 lbs. on the 3T & 4T, 1,500 lbs. on the 5T, and 2,000 lbs. on the 6T. When the E-3 is not extended the machine load capacities are not affected.

Front Hydraulic Jack (3T - 6T)

Front Hydraulic Jack (3T - 6T)

The front hydraulic jack aids in leveling the truck on uneven terrain and eliminates the truck spring reaction while operating the hoist.

Headache Rack

Headache Rack

The headache rack is made from 1/8" floor plate with supports welded on the back side for added strength.  The headache rack protects the cab when equipment is placed on the open areas of the deck.

Longer Outrigger Jacks

Longer Outrigger Jacks

The longer outrigger jacks are for 3T, 4T, 5T and 6T pump hoists.  They are designed for rigs that sit on taller frame chassis.

Mast Light

Mast Light

The photo shows a standard mast light with a shield.

Oil Cooler (3T - 10T)

Oil Cooler (3T - 10T)

The oil cooler is a heavy duty hydraulic cooling coil with a 12 volt fan which in most operating conditions allows for continuous operation normally curtailed by overheated hydraulic oil.

Other options are available upon request

Other options are available upon request

Pipe Rack

Pipe Rack

The 19' long pipe racks mount independently on right or left side of the pump hoist and will carry approximately 700 ft. of 1" pipe on each side.  The front of each pipe rack is enclosed and has three ratchet straps to secure the load.

Plastic Pipe Reel

Plastic Pipe Reel

The plastic pipe reel is built for pulling and servicing submersible pumps hung on plastic pipe. The plastic pipe reel has a 700 lb. working load with a 100 ft. per minute line speed and a spool capacity of 300 ft. of 1 " pipe.

Power to Rear

Power to Rear

The power to rear operates additional hydraulic equipment (spinners, catheads, ect.).  The power to the rear is mounted on the right rear corner of the deck on 8T and larger pump hoists and the upper right corner of the frame on 6T and smaller pump hoists.

Sandline Winch (3T - 6T)

Sandline Winch (3T - 6T)

The sandline winch is power-up and power-down.  Please see the products pages for lifting capacities and spool capacities for each pump hoist.  A heavy duty clutch for free-fall is also available on some models.

Tailgate

Tailgate

Our tailgate is ergonomically designed to hold tools while working at the job site.

Toolbox

Toolbox

The all steel, heavy duty toolboxes are built for extreme durability.  Overall sizes are:  (36" x 16" x 16") (48" x 20" x 20") (60" x 22" x 22")

Utility Body

Utility Body

9ft and 11ft bodies are the norm, with many compartment options to choose from.  Contact us for more information.

Wire Winder

Wire Winder

The hydraulic variable speed wire winder mounts on the rear of the pump hoist frame on an arm that locks into multiple positions.