60T Pump Hoist Options

Breakout Wrench Cylinder (R12 - 50T)

Breakout Wrench Cylinder (R12 - 50T)

The breakout wrench cylinder for the R12 - 50T is mounted along the 8" channel below the deck with a 5/16" cable and socket and comes through the lower tube of the pump hoist frame.  This allows the breakout to be out of the way when not being used.

Cathead (R12 - 50T)

Cathead (R12 - 50T)

The cathead is a hydraulically driven 6" diameter capstan and is mounted on the back right corner of the frame.  Pulling capacity is 3200 lbs.

Front Hydraulic Jacks (8T - 50)

Front Hydraulic Jacks (8T - 50)

The front hydraulic jacks for 8T - 50T aids in leveling the truck on uneven terrain.  We are able to mount them around items of the truck (fuel tank, battery boxes and air dryers).

Headache Rack

Headache Rack

The headache rack is made from 1/8" floor plate with supports welded on the back side for added strength.  The headache rack protects the cab when equipment is placed on the open areas of the deck.

Other options are available upon request

Other options are available upon request

Power to Rear

Power to Rear

The power to rear operates additional hydraulic equipment (spinners, catheads, ect.).  The power to the rear is mounted on the right rear corner of the deck on 8T and larger pump hoists and the upper right corner of the frame on 6T and smaller pump hoists.

Sandline Winch (8T - R15)

Sandline Winch (8T - R15)

Sandline winch is power-up and power-down.  Please refer to the product pages for lifting and spool capacities for each size model.  A heavy duty clutch for free-fall is available on some models.

Swing Arm

Swing Arm

A swing arm is an option used mostly for our larger pump hoists.  The swing arm allows the operator that uses a set of tongs/spinners to lift and swing the spinner up and out of the way when not in use by means of the tailout winch or an auxiliary winch specifically for the swing arm.

Toolbox

Toolbox

The all steel, heavy duty toolboxes are built for extreme durability.  Overall sizes are:  (36" x 16" x 16") (48" x 20" x 20") (60" x 22" x 22")

Work Lights

Work Lights

LED work lights are mounted in positions on the frame of the pump hoist to shine onto the well, winches and other various locations.